Volume correction for Crude & Refined Products, API MPMS Ch 11.1 2012 and 1980, Tables A & B, NGL with TP27/API 11.2.4 & TP15, and water
Multi-product, up to 12 individual product types with MF per product
Baseline & Proved meter factors management per product or a Reynolds number corrected MF can be applied when used with an Endress + Hauser Promass 300 Coriolis meter
Single 10 Point K-Factor linearization with override
Both Pulse Fidelity and Line Integrity options can be selected
Support for a Fast Loop or Header density meter, with separate T & P corrections
PID analog output based upon either the Main flow meter flow rate or to control the Fast Loop (slipstream or bypass) flow rate
Optional Local Panel (and web browser mimic) with configurable security for meter technician interface
Built in data logger and graphical trending display, downloadable for spreadsheet analysis
Batch initiation via website, Modbus, XML comms, Local Panel display, digital input or calendar events
Support for Single or Dual samplers
Sophisticated Alarm system with critical data logging and additional user configurable Alarms
Densitometer interface with a range of inputs. These can be analog, period mode (with Solatron calibration constants) or Digital Communications from a Coriolis meter
Snapshot report with instantaneous values and a selectable rolling average period for Density, Temperature & Pressure (for pycnometer verification)
Low frequency cut off for meter input
Support for multiple printers, serial and networked, and reports can automatically uploaded to an FTP site, and the optional SD Card
Browser based PC interface for programming. No special software needed
Hourly, Daily, Monthly, Batch, Proving and Meter Tech reports
Unified Prover
Small Volume prover and Ball provers supported
Volumetric and Gravimetric based proving
Volume correction for Crude & Refined Products, API MPMS Ch 11.1 2012 and 1980, Tables A & B, NGL with TP27/API 11.2.4 & TP15
Repeatability or uncertainty based automatic proving configurable
Proves can be initiated directly using the local operator panel (or browser), from an HMI, via Modbus or from a NÅNO Liquid Flow Computer
Supports 12 meter runs in integrated operation
Can be operated standalone, driven from the HMI or tightly integrated with the NÅNO Liquid Flow Computer
Master Meter
Mass to Mass, Mass to Inferred Mass and Volume to Volume comparisons
Inferred Mass and Volume to Volume modes use volume correction for Crude & Refined Products, API MPMS Ch 11.1 2012 and 1980, Tables A & B, NGL with TP27/API 11.2.4 & TP15
Densitometer interface with a range of inputs. These can be analog, period mode (with Solatron calibration constants) or Digital Communications from a Coriolis meter
Master Meter Prove runs can be completed by reaching a specified Quantity (Mass/Volume), Pulse Count, Time or Manual Trigger
Repeatability is calculated by average meter factor method, and the number of good runs and repeatability are user selectable
Prove cycles can be initiated using the Local Panel, the web interface or communications
Differential Pressure Gas Flow Computer
Single, Low-High or Low-Medium-High pressure cells
ISO5167 (1991, 1998 and 2003) or AGA3 Flow Calculation
AGA 8 Detailed, Gross Methods 1 & 2
ISO6976, GPA 2172 or AGA5 Heating Value Calculation selectable
Flange, Corner or D/D2 Tapping, ISA1932 Nozzle and Venturi options
Cone meters also supported
Upstream or downstream temperature location
Support for Orbital Gas PT2 or Daniel 2350 chromatograph Modbus map
Metric and US Customary measurement units
Gas Turbine Flow Computer
Supports Gas Turbine, Ultrasonic and other volumetric pulse meters
AGA7 Flow Calculation
AGA8 Detailed, Gross Methods 1 & 2
ISO6976, GPA 2172 or AGA5 Heating Value Calculation selectable
Support for Orbital Gas PT2 or Daniel 2350 chromatograph Modbus map
Metric and US Customary measurement units
Integrated LACT Controller
One box solution for Measurement, Control & Driver interface
Fully API compliant
LACT or ACT/Offloading
Multiple samplers handled
Tickets can be printed locally and/or remotely, and/or transferred via FTP
FlowCal TFX supported
Continuous Produced Water measurement
Can utilise TA1000 type Thermistor temperature sensors
Sampler System Validation Package
Automates the sampler verification process
Can be used with a single oil meter system, or a station with up to 6 oil meters
Water Injection can be upstream or downstream of the oil meter(s)
Local Panel operation and configuration
Transmitter Bias Adjustment from Local Panel
PID Control of water injection flow rate
Pre & Post Injection Baseline check
Pre, Post & Average checks against Sampler titration results
Detailed Sampler Test Report
Hourly Oil & Water reports and on-demand snapshot report